Blockader Industrial Folding Gates
Contact Us | Quote Request | My Account | Cart Contents | Checkout
Blockader®Gates

A Division of The Tamis Corp.

Sales Office:
10700 Frankstown Rd.
Suite 105
Pittsburgh, PA 15235
866-851-7854

Blockader® Portable Gates Installation Instructions

Step 1:
Caution– Pinch Point: Keeps hands and fingers out of moving diamonds of web when handling gate. Bolt both sides of gate together at top and bottom.
Step 2:
Insert each gate end into axle support, insert bolt and tighten.
Step 3:
Thread washer onto each wheel bolt, insert through gate axle wheel hole, thread washer, insert brace, thread and tighten bolt.

Step 4:
Attach top end of braces to to each gate vertical ends.
Portable Gate Add-on:
Repeat steps 1-4 for each 6 foot add-on gate.
Collapse gate, lower gate axle locking bars into pins and roll gate to desired location.
Step 5:
Align wall locking bar so that both padlock holes align with each other. Mount to wall with hardware. Repeat on opposite end.
 
Copyright 2006 • The Tamis Corporation
Graphics and text may not be reproduced without the written consent of The Tamis Corporation.